What are you looking for?

Debe Ejector Pump

Pumps

Debe Ejector Pump

Newly developed with the market's best efficiency.

  • Easy replacement of older pumps
  • Simple construction, long-lasting and reliable
  • Minimum service requirement
  • Can be equipped with all existing ejectors on the market
  • Quiet

Product description

The Ejector pump is a vertical multi-stage centrifugal pump. The electric motor is a 3-phase motor with a speed of 2850rpm. The top piece and the bottom part are made of cast iron, casing and pump shaft made of stainless steel, impellers and diffusers made of Polycarbonate / Noryl. The Ejector pump can also be delivered as a complete pump system including diaphragm hydrophore, luminaire set, couplings and ejector.


Technical documentation



Similar products

Mechanical Motor Protection

Mechanical Motor Protection

  • Motor protection with or without contactor
  • 230V or 400V coil on contactor motor protection
Dry-running Protection

Dry-running Protection

  • Protect your pump!
  • Electronic or mechanical dry-running protection
Debe Deep Well Pump 3

Debe Deep Well Pump 3"

Swedish built and tested pump with 2-year warranty.

  • "Plug and play" 230V
  • Small inner diameter 76 mm
  • The market's highest efficiency
  • Easy to handle
  • Liquid impeller in polycarbonate
  • Overheating protection
  • Drinking water approved electrical cable
Debe Subdrive Smart

Debe Subdrive Smart

Enjoy the luxury of constant pressure from the water taps.

  • Easy installation. "Plug And Play" 1x230V
  • Constant pressure from the water taps
  • Swedish-made pump with 5 year warranty
  • Advanced steering with 3 year warranty
  • Drinking water approved cable
  • Minimum installation space, 8 liter container
  • Fully electronic protection of your facility
  • A pump for all depths
  • Tested and approved by Franklin Electric
Debe Deep Well Pump 4

Debe Deep Well Pump 4" A-CN

Swedish-made and hand-built pump with 5 year warranty.

  • Multi-stage centrifugal pump with radial or semi-axial impellers
  • Impeller in Noryl
  • Bottom part and suction strainer in stainless steel "SS 2333"
  • Cylinder head in stainless steel "SS 2333" with built-in non-return valve
  • Liquid impeller in plastic
  • NEMA standard
  • High efficiency
  • Low energy consumption
Debe Deep Well Pump 4

Debe Deep Well Pump 4" GRD-GRG

Swedish built and tested pump with 2-year warranty.

  • Check valve built into all 4” pumps
  • Flow up to 350 l / min
  • Lifting height up to 400 mVp
  • Impeller in Noryl
  • Bottom part and suction strainer in stainless steel SS2333
  • Cylinder head in stainless steel SS2333 with built-in non-return valve
  • Floating impeller
  • NEMA standard
  • High efficiency
  • Low energy consumption
Salt Water Pump

Salt Water Pump

Pump that is well suited for pumping salt, brackish and pool water.

  • Debe special pump is suitable for brackish and salt water
  • Pump housing and impeller in plastic
  • Shaft in stainless steel SS2343
  • Shaft seal viton / silicon carbide
  • Self-priming with built-in ejector
  • Suction height up to 9m
  • With earthed socket and electrical cable length 2m
Jet Pumps

Jet Pumps

Jet pumps for water systems for detached houses, holiday homes, irrigation, etc.

  • Self-priming with a maximum suction height of 8m
  • Available in 1x230V and 3x400V, stainless steel or cast iron
  • Model Cam 100 / RPE is a replacement pump for ring pumps
  • Available as a pump dispenser with 20L tank
Debe Deep Well Pump 4

Debe Deep Well Pump 4" GRA-GRM

Swedish built and tested pump with 2-year warranty.

  • Check valve built into all 4” pumps
  • Flow up to 100l / min
  • Impeller in Noryl
  • Bottom part and suction strainer in stainless steel "SS2333"
  • Cylinder head in stainless steel "SS2333" with built-in non-return valve
  • Floating impeller
  • NEMA standard
  • High efficiency
  • Low energy consumption
DB3 Pumpdrive

DB3 Pumpdrive

Enjoy the luxury of constant pressure from your water taps. (For 3" pumps)

  • Built-in dry-running protection
  • Built-in overheating protection
  • Takes up little space
  • 8L membrane hydrophore
  • Easy installation - "Plug and Play" 1x230V
Debe Deep Well Pump 6

Debe Deep Well Pump 6"

  • Multi-stage centrifugal pumps with a check-valve built into the pressure nozzle
  • Impellers and diffusers in Noryl with sealing rings in stainless steel SS2333
  • Pump housing, pressure connection, suction inlet, shaft and cable protection made entirely of stainless steel SS2333
  • Largest ext. diameter = 140 mm
  • Min. borehole diameter = 150 mm
  • 3 x 400 V, 50 Hz. Direct start or Y / D soft start

 

  • Pressure pipe connection:
  • 611, 614, 621 = G 65
  • 627, 636, 648 = G80
  • Type DB4 is delivered with a 4” motor
Pumpbox

Pumpbox

Frequency control developed for 1-phase and 3-phase pumps.

  • Pressure transmitter included
  • Advantageous during winter shutdown
  • ART, automatic reset if the pump has stopped for any reason, Pumpbox tries to restart the pump within a set time interval
  • Electrical reset. Should the power supply be lost, Pumpbox will retain all previous settings and resume operation as soon as the power supply is restored
  • Protection against dry driving
  • Control and protection against overload
  • Control and protection against phase loss
Debe Deep Well Pump 6-10

Debe Deep Well Pump 6-10"

  • Pump part in cast iron as standard
  • Can be offered in other materials on request
  • Engines: 4 kW to 150 kW
  • Can be delivered for Y / D start from 7.5 kW
The Leijon Pump

The Leijon Pump

Traditional hand pump.

  • Hand pump for deep wells. Max depth 39 m
  • This traditional hand pump is cast in aluminum and therefore does not rust
  • Other parts consist of brass and stainless steel, which gives a superior service life
  • The Leijon pump is developed for the Nordic climate, the design makes the pump frost-proof and practically indestructible
  • The Leijon pump is supplied with plastic pipes and stainless steel drawbars in 3-meter lengths, this together makes the pump easy to transport and assemble
Drinking Water Approved Electrical Cable

Drinking Water Approved Electrical Cable

Drinking water approved electric cable is delivered as standard for Debe's pump package.

  • Lowest mounting temp. -25°C
  • For pumps without quick coupling
  • Incl. shrink tubing spliced to pump and waterproof tape
  • Motor cable is included in the pump price
Digital Switchmatic

Digital Switchmatic

Digital pressure switch for both single-phase and three-phase pumps.

  • Available for both 1x230V & 3x400V pumps
  • Built-in pressure sensor, dry-running protection and overload protection
Submersible Universal Pump

Submersible Universal Pump

Flexible and compact submersible universal pump from Debe.

  • Diameter 131 mm
  • Easy to assemble
  • With built-in start box and level switch start / stop for the single-phase pumps
  • The pumps are equipped with 15m cable for 3x400V / 20m for 1x230V
  • Maximum mounting depth is 15m. Max. temp. on pumped liquid 35ºC
  • Material: Outer casing, suction strainer and shaft made of stainless steel SS2333
  • Diffusers and impellers in Noryl